Need help?Do you have a question about the Miele W 487 WPS and is the answer not in the manual?
Covers electrical safety, earthing, and authorized repairs.
Steps for connecting, running an initial wash, and calibrating the load size sensor.
Explains how to calibrate the load size sensor to zero for accurate readings.
Step-by-step guide on how to select a wash programme and load the machine.
Explains how to use the display to add the correct detergent percentage.
Lists fault indicators and possible causes when the programme won't start.
Provides solutions for common issues preventing the programme from starting.
Identifies faults like blocked drain or inlet, and system errors causing stoppage.
Offers solutions for faults that cause the wash programme to stop.
Explains faults that trigger indicators but don't stop the programme.
Provides solutions for indicators that appear during normal operation.
Explains why the load size might not display and how to fix it.
Discusses issues with load size indication for specific programmes and calibration.
Addresses stale smells, white residues, and excessive detergent indicators.
Lists reasons why the drum door might not open, including power, locks, and water.
Provides solutions for situations where the drum door is stuck.
Detailed steps to drain the machine in case of a blocked outlet.
Instructions on how to safely drain water, with a caution about hot water.
Step-by-step guide to remove and clean the fluff filter thoroughly.
Explains how to use the emergency release to open the drum door.
Detailed steps for replacing the faulty lamp in the drum lighting unit.
Recommends concrete floors and avoiding soft coverings to minimize vibration.
Step-by-step guide on how to remove the transit bolts for installation.
Instructions on how to re-fit the transit bars securely.
Detailed steps on how to adjust the feet for perfect levelling using spirit level and spanner.
Details the safety valve and protective sleeve of the inlet hose.
Specifies connection requirements for the Waterproof system, avoiding mixer taps.
Emphasizes protecting the hose sleeve from damage or kinking.
Details operating pressure, reducer valves, and stopcock fitting.
Instructions on routing the drain hose, avoiding kinks, and extending it.
Compliance with safety regulations, RCD installation, and plug connection.
Explains the colour coding of wires in the mains lead for proper connection.
Provides consumption figures for various programmes and load sizes.
Lists physical dimensions, weight, capacity, and technical ratings of the washing machine.
Instructions on how to program and store a Water Plus setting in memory.
To Next Page
General
