Buzzer
When the buzzer function has been
activated, an audible tone sounds
repeatedly at the end of a
programme or when Rinse hold is
reached.
The buzzer will sound for up to an hour
after the programme has finished.
The washing machine is delivered with
the buzzer deactivated.
Follow steps A to G to programme
and store in memory.
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The washing machine is switched off.
–
The drum door is closed.
–
The programme selector is at
Finish
.
A Press the additional option buttons
Intensive
and
Water plus
at the same
time, hold pressed in and . .
B . . . switch the machine on with the
I-ON/0-OFF button.
C Let go of all these buttons. P 0
appears in the display.
D Turn the programme selector to the
COTTONS 75°C position:
E The P will now flash in the display
alternating
with the number 20
In addition, one of the following will
appear on the right of the display:
0 = Buzzer is deactivated
or
1 = Buzzer is activated
F Press the START button to change
from one to the other. The display will
change accordingly from 0 to 1 or
from 1 to 0.
G Switch the washing machine off with
the I-ON/0-OFF button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
73
To Next Page
Loading...
