This washing machine is not suitable
for building under a worktop.
Washer and Dryer stack
A Miele tumble dryer can be stacked
with the washing machine. A stacking
kit is necessary and can be purchased
from the Miele Spare Parts Department.
Please note:
a Safety distance to wall:
at least 2 cm
b Height: Stacking kit with pull-out
shelf:
approx. 172 cm
Stacking kit without pull-out shelf:
approx. 170 cm
c Depth of the washer-dryer stack:
approx. 63 cm
The load size sensor must be
calibrated to zero after the washing
machine has been installed and
connected.
See "Before using for the first time".
Installation and connection
57
To Next Page
