Delay start/Time left indicators
Delay start
The start of a programme can be de-
layed by up to 9 hours 30 minutes.
N.B.:
The machine must be switched on and
the indicator light “Delay start” flashing.
1 Select time delay.
Press the “Delay start” pushbutton until
the required delay period shows in the
display.
Each press of the button increases the
delay by 30 minutes.
2 Select the programme.
The “Delay start” indicator light stays
on constantly.
The display counts back in 1 minute
steps. After the appropriate time has
elapsed, the “Delay start” light will go
out.
The “Time left” indicator light will come
on and the time remaining in the pro-
gramme selected will be shown.
Deleting “Delay start”
Press the pushbutton when “9 h 30
mins” shows in the display.
Time left
Programme duration shows in hours
and minutes, as soon as:
– the programme selector switch is set
to the required programme
– the delay start period has elapsed.
After the programme has started, the
time left display counts down in 1
minute intervals.
At the beginning of a programme, the
duration of the programme for a full
load will be displayed.
In the COTTONS programme, the type
and volume of the wash will be moni-
tored during the first water inlet phase.
With a part load the time display shows
a shorter time of up to 40 minutes.
22
To Next Page
Loading...
