Miele W 916 - Page 46

Programmable functions
To check the programmable
function
Carry out Steps 1 to 5.
If the LED light “Rinses 1-2” lights up,
the relevant programmable function is
activated.
Press the “I-ON/0-OFF” button. This
finishes the check of the programm-
able function.
To cancel the programmable
function:
Proceed as for “Switching on a pro-
grammable function”.
Step 1 to Step 6 inclusive.
With step 6 the programmable function
can be cancelled.
The indicator light “Rinse 1-2” goes out
again.
Press the “I-ON/0-OFF” button.
The programmable function is can-
celled from memory.
46