Before using for the first time
23
5. Starting the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottonsprogramme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Open and run "Cottons" 90°C without
laundry.
Touch the sensor control until the
OKsensor control lights up and con-
firm with OK.
Open the stopcock.
Touch the Start/Add laundrysensor
control.
The calibration programme then starts.
It will take approximately 2hours.
At the end of the programme, the fol-
lowing message will appear in the dis-
play:
Set up complete
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Turn the programme selector to the
position.
To Next Page
