Changing the programme sequence
40
Adding or removing laundry
after the programme has
started
Press the Start/Stop button.
The following will appear in the display:
Scroll up the list with the or
sensor to:
Touch the OK sensor.
If this message does not appear in the
display then it is no longer possible to
add or remove items of laundry.
The programme will stop and the door
will unlock.
Pull open the door.
Add or remove items.
Close the door.
Press the Start/Stop button.
The programme will continue.
Please note:
Once a programme has started the
washing machine cannot recognise any
adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load
The door cannot be opened, if:
– the suds temperature is above 55°C.
– the water is above a certain level.
– the programme has reached the Spin
stage.
If you want to open the door when the
above conditions are present you will
need to cancel the programme.
The safety lock will remain activated if
the temperature in the drum is above
55°C. The lock will not deactivate
until the temperature has dropped to
below 55°C.
To Next Page
Loading...
