Miele WS 5191 - Page 57

x
Note
Installation kit 04451340 for PW 610x, PW 613x , PW 616x and PW 620x also contains:
• 1 pipes 173 x 40
• 2 elbow 70 x 87 PP
• 1 branch pipe 70 x 50 x 87, DIN 19560
• 1 adapter
• 1 bushing DIN 4060, HTGM 40/50 C
• 1 branch pipe
• 1 ring
• 1 adapter
• 2 hose clips SGL 70-90
• 1 branch pipe 70 x 50 x 87, DIN 19560
• 1 pipes DIN 19560, 50 x 40
• 1 elbow 70 x 87 PP
• 8 hoses 1 1/4" 32 x 5,5
• 1 water recycling wiring harness
• 1 6-terminal terminal block
• 1 label 1-6,10 x 68
• 2 screws 3,5 x 11
• Additional notes
• Additional chart
• 1 setup for water recycling
• 1 WRG 02 hose assembly
• These instructions
List of illustrations (PW 610x, PW 613x, PW 616x, PW 620x):
– Fig. 1, Mixer box cover removal
– Fig. 2, Removing the drain hose from the mixer box
– Fig. 3, Water recycling connection stub on mixer box
– Fig. 4, Drilling through water recycling connection stub on mixer box
– Fig. 5, View of water recycling connection stub from liquid dispensing cover
– Fig. 6, Water recycling intake
– Fig. 7, Mixer box cover installation
List of illustrations (PW 6241, PW 6321):
– Fig. 8, Hose pre-assembly
– Fig. 9, Suds container preparation
– Fig. 10, Laying the hoses
– Fig. 11, Securing angled bracket and holder
– Fig. 12, Securing the hoses
– Fig. 13, Mixer box cover installation
List of illustrations (WS 5101, WS 5141, WS 5191, WS 5240, WS 5320):
– Fig. 14, Hose pre-assembly
– Fig. 15, Installing in the machine
– Fig. 16, Intake hose for WS 5101, WS 5141
List of illustrations (WRG 02 water recycling assembly):
– Fig. 17, Installing the holder frame
– Fig. 18, Tank installation
– Fig. 19, Installing the pre-assembled angled hoses
– Fig. 20, Filter assembly
– Fig. 21, Hose connections
Produktgruppe 512 Umbau- und Montageanweisung
57 von 60 M.-Nr. 04598534
16.12.2011 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.