Miele WSD023 WCS User Manual

Before using for the first time
16
Running the first programme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottonsprogramme
must be run without laundry and
without detergent.
 Open the stopcock.
 Turn the programme selector to the
Cottonsposition.
The washing machine is now switched
on and in the control field, the temper-
ature 40°C lights up.
 Touch theStart/Add laundry sensor
control.
The programme will start.
After 10minutes, the indicators dim,
except for theStart/Add laundry
sensor control.
Opening the door at the end of
the programme
The door remains locked during the
anti-crease phase. The control field
lights up for the first 10minutes. The
control field then goes out and
theStart/Add laundry sensor control
flashes.
 Turn the programme selector to the
position.
 appears on the timer display and
the indicator light goes out.
The door unlocks.
Tip: After the anti-crease phase, the
washing machine will have switched off
and the door unlocked automatically.
The control field will be completely
dark.
 Take hold of the door and pull it
open.
Tip: Leave the door slightly open to al-
low the drum to dry.
Initial commissioning is now complete.

Miele WSD023 WCS Specifications

General

Brand	Miele
Model	WSD023 WCS
Category	Washer
Language	English