Cancelling a programme
You can cancel a programme at any
time after it has started.
^
Press the
Start/Stop
button briefly or
turn the programme selector to
Stop
.
... During washing:
The suds will be pumped away and the
washing programme is cancelled.
... During drying:
The garments will be cooled down
before the door can be opened.
If you want to remove the laundry:
^ Press the
Door
button.
If you want to select a different
programme:
^ Switch the machine off with the
I-On/0-Off
button.
^ Switch the machine back on again
and select a new programme.
Interrupting a programme
^
Switch the machine off with the
I-On/0-Off
button.
To continue with the same programme:
^
Switch the machine on with the
I-On/0-Off
button.
Altering a programme
After the start of a programme it is no
longer possible to select a different
programme.
You will need to cancel the current
programme before you can select a
new one.
Altering the temperature
You can alter the temperature of a
washing programme up to 5 minutes
after the programme has started.
^ Use the – and + buttons to alter the
temperature.
Altering the spin speed
^
Press the OK button. The spin speed
will be shown highlighted. You can
use the – and + buttons to change
the spin speed up until the final spin
begins.
You can change the thermospin
speed up until the thermospin
begins.
Altering the drying level / drying time
You can alter the drying level or drying
time during the washing programme
but not once the drying programme has
started.
Changing the programme sequence
43
To Next Page
Loading...
Need help?
General
