Need help?Do you have a question about the Miele WT 946i S wps and is the answer not in the manual?
General| Brand | Miele |
|---|---|
| Model | WT 946i S wps |
| Category | Washer/Dryer |
| Language | English |
Instructions for environmentally friendly disposal of transport and protective packaging materials.
Guidance on responsible disposal of old electrical and electronic appliances.
Specifies intended use, general usage rules, and child supervision.
Ensures electrical safety, proper installation, and the need for qualified technicians.
Conditions for water damage protection provided by the Miele Waterproof system.
Covers operational safety, temperature, transit fittings, and foreign objects.
Warnings regarding detergent use, descaling, solvent-based agents, and dyes.
Identifies fabrics posing a fire risk during drying and safety for accessories.
Details on washing separately, drying separately, and continuous wash/dry sequences.
Highlights special wash programmes like Woollens, Quick wash, and Rinse.
Diagram and explanation of buttons, selectors, and indicator lamps on the control panel.
Detailed description of the function of each button and selector on the control panel.
Explains how to use the programme selector and additional option buttons.
Details on setting spin speed, 'Rinse hold', and 'Without final spin' functions.
Advice on optimal load, programme selection, and detergent use for efficiency.
Procedure to flush out residues before the first wash cycle.
Explanation of how to set the water hardness for optimal detergent use.
Fabric types, options, detergent, and max load for the COTTONS programme.
Fabric types, options, detergent, and max load for MINIMUM IRON.
Details for DELICATES and WOOLLENS programmes, including fabric types and notes.
Information on the Quick Wash programme for lightly soiled fabrics.
Details for Starch, Drain/Spin, and Separate Rinse programmes.
Procedure to rinse out fluff residues after a drying programme.
Explains washing symbols for different fabric types and their corresponding machine actions.
Details on symbols for hand wash, dry clean, tumble dry, and ironing.
Ensures the drying selector is on 'Finish' to avoid unintended drying.
Guidance on sorting by colour, care labels, and preparing garments before washing.
Steps for switching on, opening/closing the door, loading, and opening the stopcock.
Instructions on selecting the wash programme and desired spin speed.
Details on using Soak and Pre-wash options for heavily soiled items.
Explanation of Water plus for higher rinse quality and Short for lightly soiled items.
Explains issues caused by too little or too much detergent.
Illustrates correct detergent placement in the dispenser compartments.
How to set a delay start time and how to cancel it.
What happens at the end of a programme and how options are stored in memory.
Specifies which programmes allow adding/removing laundry and how.
Conditions under which the door cannot be opened during a wash cycle.
Detailed breakdown of the COTTONS programme stages: main wash, rinses, spinning.
Cycle details for MINIMUM IRON and DELICATES programmes.
Cycle details for QUICK WASH, Starch, and Separate Rinse programmes.
Explanation of Anti-crease, additional rinses, interim spins, and graduated rinsing.
Guidance on choosing and using appropriate detergents for the machine.
Information on water hardness levels and the use of water softeners.
How the machine automatically dispenses fabric conditioner or liquid starch.
Instructions for adding conditioner/starch manually or for separate starching.
Advice on checking care labels and using appropriate drying programmes.
Lists fabrics that should not be tumble dried, such as woollens and down-filled items.
Details for COTTONS Extra Dry and Normal drying programmes.
Details for COTTONS Hand Iron and Machine Iron drying programmes.
Information on MINIMUM IRON programmes: Normal plus, Normal, Hand iron.
Guidance on using TIMED DRYING programmes for varying fabric types.
When to use separate drying and ensuring the wash selector is on 'Finish'.
Steps for preparing laundry, switching on, loading, and closing the machine.
How to select the appropriate drying programme using the programme selector.
Explanation of Thermospin process and the Drying/Low Temp option.
How to set a delay start for drying and how to cancel it.
What happens at the end of a drying cycle and actions after drying.
Step-by-step guide for washing and drying laundry in one continuous sequence.
Advice on detergent use and selecting the drying programme for a continuous sequence.
Information on buzzer, indicator lights, and opening the door.
Steps for removing laundry, checking the door seal, and ensuring the drum is empty.
Explains how to rinse out fluff collected during drying.
Instructions for running the 'Rinse out fluff' programme.
How to cancel a running programme or an incorrectly selected one.
Reference to the 'Safety lock' section for changing locked programmes.
How to activate the programme lock to prevent changes.
Steps to disable the programme lock and resume control.
Instructions for cleaning the exterior and interior drum of the machine.
Detailed steps for removing and cleaning the detergent dispenser.
Procedure for cleaning the siphon tube and channel in the dispenser.
How to clean the inside of the door glass and the metal cap.
Instructions for checking and cleaning the filter in the water inlet hose approximately every 6 months.
Guidance for easily correcting minor problems without a service technician.
Overview of the sections covered in the problem-solving guide.
Remedies for issues with power supply, door closure, and blown fuses.
Instructions on how to de-activate the safety lock if the programme won't start.
Solutions for blocked water inlet systems or outlets, and drain hose height.
Addressing issues with the final spin detection and load imbalance.
Checks for water inlet blockages, low pressure, or dirty filters.
Resolving issues with drying overload indicators and safety lock activation.
Solutions for when the door won't open due to power, closure, or residual water.
Explanation of why the door may be locked due to high internal temperature.
Option 1: Waiting for the temperature to drop below 70°C.
Option 2: Selecting cooling programmes. Option 3: Using the high-temperature door opening function.
Causes and solutions for damp laundry, including small loads and uneven distribution.
Addresses blockages in the water outlet causing residual water.
Solutions for poor spinning and machine vibration during spin cycles.
Troubleshooting slow water intake, residue, and dispensing problems.
Causes and remedies for too much foam and white residues on dark textiles.
Addressing issues with grey, greasy particles due to insufficient detergent.
Tips for improving liquid detergent performance, especially for stains.
Solutions for limescale deposits and normal pump noises.
Procedure for opening the drum door during drain blockages or power outages.
Steps for draining water from the machine using the emergency drain hose.
Detailed instructions on using a tool to release the emergency door latch.
Step-by-step guide to accessing, cleaning, and replacing the fluff filter.
Information on contacting Miele Dealer or Service Department for support.
Information regarding the 1-year appliance guarantee and where to find further details.
Labeled diagram showing the front components of the washer-dryer.
Recommendations for installation surfaces, such as concrete floors, to minimize vibration.
Guidance on lifting, positioning, and securing the machine during installation.
Detailed illustrations and steps for removing transit bars before operation.
Advice on storing transit fittings for future use and the re-fitting procedure.
Explains why perfect levelling is crucial for safe and proper operation.
Step-by-step guide on adjusting the feet and securing them with counter-nuts.
Guidance for installing the machine under a continuous worktop.
Details on niche heights, worktop dimensions, and available raising kits.
How to adjust the adapter to match the height of adjacent kitchen drawer fronts.
Instructions for fitting a decor panel and its required dimensions.
Guidance on positioning and using the template for drilling fixing holes.
Steps for fixing the front panel in position using screws and hinges.
How to align the door to be flush with the control panel for proper shut.
Using spacers to achieve correct door alignment and seal.
Instructions for fitting a plinth facing to match the kitchen, using velcro strips.
Details on the three main components: inlet hose, electronic unit, and drain hose.
Explanation of sump, overflow protection, and drain hose ventilation.
Instructions for connecting to the mains water supply, including stopcock fitting.
Information on water pressure, flow rates, and compatibility with hot water supplies.
Warnings about connecting the safety valve casing only to its own stopcock.
Importance of not damaging or kinking the protective sleeve of the hose.
Safety precautions when disconnecting the Waterproof system hose.
Information on purchasing an optional extension hose.
Details on connecting the drain hose to a sink, drain pipe, standpipe, or floor gully.
Information on extending the drain hose and using a Duo-drain pump.
Guidance on qualified electricians, mains supply, switched sockets, and RCDs.
Instructions for handling non-rewireable plugs, fuse replacement, and earthing.
Table detailing energy and water consumption for various washing programmes.
Table detailing energy and water consumption for drying programmes.
Key physical specifications including height, width, depth, and load capacities.
Details on water pressure, pump limits, fuse rating, and test marks.
Instructions to activate the high water level function for improved rinsing.
Steps for programming and storing user-defined settings for wash programmes.
How to activate an additional rinse for the COTTONS programme, especially for soft water.
Instructions to program and store the audible tone at the end of a wash/dry programme.
How to program the function to allow door opening even when the temperature is above 70°C.
How to shorten the drying time in 1-minute increments.
How to lengthen drying time or restore the factory setting.
To Next Page
