Need help?Do you have a question about the Miele WTD160 WCS 8/5 KG WT1 and is the answer not in the manual?
General| Load Capacity (Washing) | 8 kg |
|---|---|
| Load Capacity (Drying) | 5 kg |
| Washer/Dryer Type | Freestanding |
| Dimensions (HxWxD) | 850 x 596 x 637 mm |
| Water Consumption per Cycle (Washing) | 50 L |
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Programs | Cottons, Minimum Iron, Delicates, Woollens, Dark Garments/Denim |
Shows connection for water supply.
Points to power connection.
Shows drain hose connection.
Identifies the main control interface.
Locates the detergent compartment.
Identifies the appliance door.
Shows location for filter access.
Points to levelling feet.
Lid for transport stability.
Shows rear drain hose connection.
Shows rear water inlet connection.
Caps protecting transit bar holes.
Clips for securing hoses during transport.
Shows rear power connection.
Recommends concrete floors for stability.
Advice for installing on wooden floors.
Danger of machine falling from plinth.
Risk of lid detachment during transport.
How to safely lift and move the appliance.
Step-by-step guide for removing left bar.
Step-by-step guide for removing right bar.
Danger from uncovered holes.
How to insert covers after bar removal.
Risk of damage if moved without bars.
Method to open the covers.
Instructions for refitting bars.
Building under kits need expert fitting.
Ensure utilities are accessible post-installation.
Ensures safe and proper operation.
Procedure for levelling feet.
Warning about unsecured feet.
Lists inlet hose, electronic unit, drain hose.
Withstands high pressure.
Floor tray, float switches, pump.
Prevents overfilling via drain pump.
Prevents complete emptying.
Must match drinking water standards.
Min 100 kPa, max 1000 kPa.
Connection to mains water supply.
Not suitable for hot water.
Recommended for replacement.
Filter in union nut of inlet hose.
Longer hoses sold separately.
Drains via pump with 1m delivery head.
Max length for hoses/pumps.
Hooking hose securely.
Connection to drain pipe.
Connection to gully.
Using a plastic nipple.
Parts for sink connection.
Tightening clip on adapter.
Ready for earthed socket.
Socket must be accessible.
Avoid multi-socket adapters.
Adherence to safety regulations.
Compare with site connection.
Do not connect to autonomous power.
To Next Page
