EasyManua.ls Logo

Miele WTF 130 WPM User Manual

Miele WTF 130 WPM
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating instructions
Washer-dryer
To avoid the risk of accidents or damage to the machine, it is essential
to read these instructions before it is installed and used for the first time.
en-GB M.-Nr. 10 506 500

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Miele WTF 130 WPM and is the answer not in the manual?

Miele WTF 130 WPM Specifications

General IconGeneral
Door hingeRight
Control typeButtons, Rotary
Loading typeFront-load
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Half-load-
Drying capacity4 kg
Washing capacity7 kg
Delay start (max)24 h
Spin-drying classA
Maximum spin speed1600 RPM
Noise level (wash)- dB
Water consumption washing per cycle90 L
Energy consumption washing per cycle- kWh
Water consumption washing & drying per cycle- L
Weight and Dimensions IconWeight and Dimensions
Depth636 mm
Width596 mm
Height850 mm

Summary

Warning and Safety instructions

Correct application

Defines the intended use and environments for the washer-dryer.

Safety with children

Safety measures and precautions related to children using or being near the appliance.

Technical safety

Essential safety checks and guidelines for electrical and technical installation.

Correct use guidelines

Specific instructions and warnings for operating the washer-dryer correctly.

Operating the washer-dryer

Before using for the first time

Remove drain hose elbow

Step-by-step guide to removing the drain hose elbow stored in the drum.

Remove protective foil and stickers

Instructions for removing protective films and stickers before initial use.

Start calibration programme

Guide to running the initial calibration programme for optimal performance.

Washing procedures

Prepare the laundry

Steps for preparing laundry, including emptying pockets and sorting.

Select a wash programme

How to choose and set a washing programme using the selector dial.

Add detergent

Detailed instructions on adding detergent via drawer or CapDosing.

Start and finish programme

How to start a programme and what to expect at its conclusion.

Detergent and fabric care

Detergent dispensing and selection

Guidance on detergent dosage, soiling levels, and water softeners.

Drying procedures

Prepare laundry for drying

Steps for sorting and preparing laundry specifically for the drying process.

Start and finish drying programme

Instructions for starting the drying programme and actions upon completion.

Washing and drying combined

Start and finish combined programme

How to start and complete a combined washing and drying cycle.

Changing the programme sequence

Cancel or interrupt programmes

Procedures for cancelling or temporarily interrupting a running programme.

Adding or removing laundry

Guide on how to add or remove items during the initial phase of a programme.

Delay start function

Setting and managing delay start

Comprehensive guide to setting, altering, and cancelling delayed programme starts.

Cleaning and care

Water inlet filter cleaning

Guide on how to locate, clean, and replace the water inlet filter.

Troubleshooting guide

Programme fails to start

Solutions for issues where the programme does not initiate or display is dark.

Fault messages during operation

Troubleshooting common fault messages like water intake or drainage errors.

End-of-programme messages

Explanations and solutions for messages appearing after programme completion.

Unsatisfactory wash results

Solutions for common wash outcome problems like residues or poor cleaning.

Unsatisfactory drying results

Troubleshooting advice for issues related to laundry being too damp or too dry.

Door opening issues

Solutions for problems where the door cannot be opened.

Blocked drain or power cut procedures

Step-by-step guide for draining the machine in case of blockages or power loss.

Cleaning drain filters

Detailed instructions on how to clean the machine's drain filters.

Installation and connection

Installation surface requirements

Guidance on choosing a suitable and stable surface for appliance installation.

Remove transit bars

Crucial instructions for removing transit bars before operating the machine.

Aligning the washer-dryer

Steps for levelling the appliance using the adjustable feet for stability.

Water supply connection

Instructions for connecting the appliance to the mains water supply.

Water drainage connection

Guidelines for connecting the drain hose to sinks, pipes, or gullies.

Electrical connection (UK)

Safety and connection procedures for the UK electrical supply.

Miele@home system

Connecting washer-dryer to WiFi

Detailed steps for connecting the appliance to a WiFi network via app or WPS.

Technical data

Appliance settings

Related product manuals