Miele WTF 130 WPM User Manual

Before using for the first time
20
Start the calibration pro-
gramme
The following message will in the dis-
play:
Open  and run Cottons 90°C without
laundry.
 Touch the sensor repeatedly until
you have read all the rows of text.
The OK sensor will light up.
 Confirm the message with the
OKsensor.
It is important to calibrate the machine
to ensure optimum water and energy
usage, as well as optimum washing
and drying results.
To do this the Cottons 90°C pro-
gramme must be run without laundry
and without detergent.
No other programmes can be started
until calibration has been carried out.
 Open the stopcock.
 Turn the programme selector to Cot-
tons.
Do not change any other programme
settings.
1:55 90°C 1600
 Press the Start/Stop button.
The calibration programme will start.
At the end of the programme the follow-
ing message will appear in the display:
Set-up complete
 Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
 Switch the washer-dryer off with the
 button.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm