Installation and connection
90
If the holes are not covered,
there is a risk of injury.
To avoid the risk of injury the holes
for the transit bars must be covered
after they have been removed.
Plug the holes with the plastic caps
as illustrated.
The washer-dryer must not be
moved without the transit bars in
place.
Keep the transit bars in a safe place.
They must be refitted if the washer-
dryer is moved again (e.g. when
moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing
the procedure.
Installing under a continuous
worktop
The machine lid cannot be re-
moved.
This washer-dryer(with lid intact) can be
pushed under a worktop if there is
space to do so.
To Next Page
Loading...
