EasyManuals Logo

Miele WTF 130 WPM User Manual

Miele WTF 130 WPM
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #103 background imageLoading...
Page #103 background image
Settings
103
Language
The display can be set to appear in
one of several different languages.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The selected language will be stored in
memory.
Degree of soiling
You can select the default setting for
the degree of soiling or switch off the
degree of soiling query.
Options
Default setting
You can choose between the Light,
Normal or Heavy degree of soiling
settings.
Factory default setting: Normal
Query
You can switch the degree of soiling
query on or off.
Factory default setting: On
Buzzer volume
You can select one of seven different
settings for the buzzer volume.
The settings are represented by a bar
chart. At the lowest setting, the buzzer
is switched off.
Keypad tone
Each touch of a sensor or press of a
button is confirmed with an audible
tone.
Factory default setting: the keypad tone
is switched on.
Code
The code prevents the washer-dryer
being used without your knowledge.
Options
Activate
The code is 125 and can be activ-
ated.
When the code has been activated,
you have to enter the code after
switching the washer-dryer on. Oth-
erwise the washer-dryer cannot be
operated.
Deactivate
For using the washer-dryer without
entering the code. This only appears
if the code has been activated previ-
ously.
Change
You can enter a code of your own.
If you forget the code the machine
will have to be unlocked by Miele
Service.
Make a note of the new code.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele WTF 130 WPM and is the answer not in the manual?

Miele WTF 130 WPM Specifications

General IconGeneral
Door hingeRight
Control typeButtons, Rotary
Loading typeFront-load
Product colorWhite
Built-in displayYes
Appliance placementFreestanding
Half-load-
Drying capacity4 kg
Washing capacity7 kg
Delay start (max)24 h
Spin-drying classA
Maximum spin speed1600 RPM
Noise level (wash)- dB
Water consumption washing per cycle90 L
Energy consumption washing per cycle- kWh
Water consumption washing & drying per cycle- L
Weight and Dimensions IconWeight and Dimensions
Depth636 mm
Width596 mm
Height850 mm

Related product manuals