Programme sequences can be
changed after the START button has
been pressed. It is also possible to
select a follow-on drying programme
any time up to the end of a washing
programme.
To cancel a programme
^
Turn both programme selectors to the
Finish
position.
The programme sequence indicators
will flash one after the other in the
programme sequence display. The
programme has been successfully
cancelled when only the
On
indicator
lamp is on.
To cancel an incorrectly
selected programme
^ Turn both programme selectors to the
Finish
position.
When only the
On
indicator lamp is on:
^
Turn the programme selector to the
required programme.
^
Switch additional options on or off as
required.
^
Press the START button.
To change a programme which
has been locked
See section "Safety lock".
Changing a programme sequence
38
To Next Page
Loading...
