Building under a continous
worktop / in a row of kitchen
units
The building under kit* must be
fitted by a suitably qualified fitter.
–
A special building under kit* is
required. The cover plate supplied
with the building under kit* replaces
the machine's lid.
To ensure electrical safety the cover
plate must be fitted.
–
When installing under a 900/910 mm
high worktop a spacer kit* is
required.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
Fitting instructions are supplied with the
building under kit.
All items marked * are available to order
from your Miele Dealer or from the Miele
Spare Parts Dept.
Installation and connection
60
To Next Page
