Opening the door at high
temperatures
It is possible to open the door during
a washing or drying programme,
even if the temperature is above
70°C.
,
Warning: The water in the
machine will be very hot and
could cause burning or scalding.
The machine is delivered with the
programmable function switched off.
Follow steps A to G to programme and
store in memory.
The programmable functions are
activated with the help of the additional
option buttons and the WASHING
programme selector.
Before you begin, first ensure that
:
– the machine is switched off.
–
the drum door is closed.
–
the WASHING and DRYING
programme selectors are at the
Finish
position.
A Press the additional option buttons
Soak
and Pre-wash at the same time,
hold pressed in and . .
B . . . switch the machine on with the
I-ON / 0-OFF
button.
C Then release these buttons.
–
The
Soak/Pre-wash
and
Washing
sequence indicator lamps will flash.
–
A P will appear in the left of the
display.
D Turn the WASHING programme
selector to the "DELICATES Cold"
position.
E The following will appear in the
display:
0 = Programmable function off
(de-activated)
or
i = Programmable function on
(active)
Press the START button to switch
between
0 to i activated or from
i to 0 deactivated.
F Switch the machine off with the
I-ON
/ 0-OFF
button.
The setting you have selected is now
stored in memory.
G Turn the WASHING programme
selector to the
Finish
position.
Programmable functions
73
To Next Page
Loading...
