Miele WXR 860 User Manual

6. Starting a program
38
Starting a program
The program can be started when the
Start/Stopsensor button is flashing on
and off.
 Touch the Start/Stopsensor button.
The door will lock and the wash
program will start.
The program status will appear in the
display.
 11:02

Normal
Status
Time left
h1:57
Washing
Add laundry

The washing machine will keep you
updated on the program status and the
time remaining for the program to run.
If a delay-start period has been
selected, this will count down in the
display until the program starts.
The drum lighting switches off once the
program has started.
Energy savings
After 10minutes, the indicators dim.
The Start/Stop sensor button will light
up, flashing.
You can reactivate the indicators:
 Touch the Start/Stop sensor button
(this does not have any effect on a
running program).
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time.
 Touch the Add laundrysensor button.
The following appears in the display:
Please wait
The program will stop and the door will
unlock.
The following appears in the display:
 11:02

Normal
Status
Add laundry
The door can be opened.

 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Stopsensor button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C.
- The water inside the drum is above a
certain level.

Miele WXR 860 Specifications

General

Brand	Miele
Model	WXR 860
Category	Washer
Language	English