Mighty Mule Wireless Gate Entry Intercom - User Manual

Moving Gate
Area
2`WdSeOg




NEVER INSTALL
any control device
within gray area
Crystal clear two-way communication up to 500 feet wireless or 1000 feet with extended antenna.
Wireless Gate Entry Intercom
Thank you for purchasing the GTO Wireless Gate Entry Intercom. Please
read the directions carefully and completely before installing.
Instructions for Wireless and Wired Installations
®
ACCESS CONTROLS
GTO, Inc. • 3121 Hartsfield Road • Tallahassee, Florida 32303
Telephone (850) 575-0176 • Fax (850) 575-8912 • website www.gtoinc.com
SAFETY NOTE: Never install the keypad
portion of this unit where a person can
reach through the gate to activate it, or
where a person can touch the gate while
activating the keypad. The recommended
minimum distance between the gate and
keypad is 10 ft.
©2005 GTO, Inc.rev - 05-01-07
IMPORTANT: Allow the
intercom base unit’s battery
to charge for 12 hours before
using the system for the first
time. See page 7 for details.
Keypad Unit
Base Unit

Summary

Keypad Installation Methods

Wireless Installation

Instructions for wireless keypad installation, emphasizing line of sight and range limits.

Wired Installation

Instructions for hard-wired keypad installation using low voltage wire and connecting to the opener.

Control Board Connections

Programming the Keypad

Program New Master Code

Program New Entry Code

Program New Temporary Entry Code

Delete An Entry Code

Delete ALL Entry Codes

Intercom Base Unit Installation

Extending Antenna Range

System Testing and Troubleshooting

Test the System

Trouble Shooting

Guides users through common issues and provides solutions.

RESET ID Procedure

Specific steps to reset the intercom/keypad ID code to resolve communication problems.

Mighty Mule Wireless Gate Entry Intercom Specifications

General

Brand	Mighty Mule
Model	Wireless Gate Entry Intercom
Category	Intercom System
Language	English