To Next PageTo Next Page
Need help?Do you have a question about the miGuard AWI and is the answer not in the manual?
Power Supply| power supply | DC 9V 6F22 battery x 1 |
|---|---|
| standby current | ≤ 5uA |
| alarm current | ≤15mA |
Indicators| LED frequency in working state | Once every 32 sec. |
|---|---|
| LED frequency in alarming state | Once every 0.62 sec. |
| low battery indicator | Beep once with a LED flash per 60s |
Operating Environment| operation temperature | -10°C ~ +55°C |
|---|---|
| relative humidity | ≤95% (no condensing) |
| monitoring area | 20m2 |
Alarm Specifications| alarm decibel | 85dB/3m |
|---|---|
| radio frequency | 315MHz, 433.92MHz or 868MHz |
| transmitting distance | ≤ 80m in open area |
Physical Dimensions| housing material | ABS plastic |
|---|---|
| dimensions (L x W x H) | 102x102x31mm |
| model version | SMK-500-EN-1405-V2.0 |
Guidance on how to dispose of the product and packaging according to WEEE Directive.
Steps to connect the AW1 Control Panel to your home WiFi network.
Explanation of Normal Zone, Home Zone, and 24 Hour Zone settings for sensors.
Details on operation, alarm, and status notifications provided by the system.
Instructions for mounting the Control Panel on a wall using the provided bracket.
Instructions for using the Wall Bracket as a tabletop stand for the Control Panel.
Steps for powering up, attaching pads, and placing the Door/Window Sensor and magnet.
Diagram illustrating the PIR sensor's detection range and optimal motion direction.
Instructions for powering up, performing a walk test, and installing the PIR motion sensor.
Troubleshooting for WiFi connection, app control, and response problems.
Addressing issues with alarming, system reset, and managing notifications.
Instructions on deleting accessories and managing system functions.
Details on operation, alarm, and status notifications provided by the system.
Instructions for mounting the Control Panel on a wall using the provided bracket.
Instructions for using the Wall Bracket as a tabletop stand for the Control Panel.
Steps for powering up, attaching pads, and placing the Door/Window Sensor and magnet.
Diagram illustrating the PIR sensor's detection range and optimal motion direction.
Instructions for powering up, performing a walk test, and installing the PIR motion sensor.
Troubleshooting for WiFi connection, app control, and response problems.
Addressing issues with alarming, system reset, and managing notifications.
Instructions on deleting accessories and managing system functions.
Technical details for the Control Panel, including power, dimensions, and operating conditions.
Technical details for the Remote Control, including power, transmitting distance, and dimensions.
Technical details for the Door/Window Sensor, including power, transmitting distance, and dimensions.
Technical details for the PIR Motion Sensor, including power, detection range, and dimensions.
