miGuard SPS260 User Manual

Solar Powered Siren
These instructions should be read in conjunction with your miGuard Wireless
Burglar Alarm System Installation and Operating Instructions, and be retained
for future reference. The Siren can also be used as a standalone Alarm System
when connected to miGuard Sensors.
Introduction
Fit the Siren to the outside of the building in a position that is clearly visible and at a
height which is relatively inaccessible to an intruder.
Although the Siren is designed to work on any aspect wall, for optimum performance
try to avoid fixing it to a North facing wall, or to a wall with shadows cast by walls,
trees and roof overhangs.
For optimum radio signal reception mount the Solar Siren at a minimum distance of 1
metre away from any external or internal metalwork (drainpipes, gutters, radiators, etc)
Positioning
SPS260
Contents:
1 x Solar Powered Siren
1 x 3.7V/1200mAh Rechargeable Lithium Battery, 1 x 9V Alkaline Battery
Fixings and Instructions
Rear
Anti-tamper
Switch
Sirens
Learn Button
Inner Tamper Switch
Alarm LED Indicators
9V
Start-up
Battery
Rechargeable 3.7V
1200mAh Lithium Battery
Rear Cover Tamper Socket
Status LED Indicator *
* The Status LED flashes only when armed
30 seconds (default)
2
minutes
5
minutes
Siren Duration Setting
Volume Setting
High (default) Mute Low
INSTRUCTIONS

miGuard SPS260 Specifications

General

Brand	miGuard
Model	SPS260
Category	Security System
Language	English

Summary

Introduction to miGuard Solar Powered Siren

Siren Positioning Guidelines

Guidance on optimal placement for visibility, accessibility, and radio signal reception.

Package Contents

Lists all items included in the product package, including the siren and batteries.

PCB Layout and Component Identification

Siren Duration Setting Configuration

Details how to configure the siren's alarm duration using jumpers (5 min, 2 min, 30 sec).

Siren Volume Setting Configuration

Details how to configure the siren's alarm volume using jumpers (High, Mute, Low).

Usage and Connectivity

Connecting to miGuard Control Panel

Step-by-step guide to register the siren with the miGuard Wireless Burglar Alarm System.

Connecting Wireless Accessories to Siren

Instructions for pairing additional wireless accessories directly to the siren for standalone operation.

Installation and Testing Procedures

Physical Installation Steps

Instructions for mounting the siren housing and securing the front cover.

Siren Test Mode Operation

How to enter and exit test mode to verify siren functionality without triggering alarms.

Entering Learn Mode via Remote Control

Method to enter learn mode using the remote control for pairing accessories.

Technical Specifications

Guarantee and Returns

Product Guarantee Information

Details the one-year guarantee against faulty materials and workmanship.

Return Procedure

Steps for returning a faulty product, including contact and packaging requirements.

Disposal and Recycling

Example Installation Diagram