Return to the WinBox and upload downloaded packages;
Restart the device.
Safety Information:
Before you work on any MikroTik equipment, be aware of the hazards involved with electrical
circuitry, and be familiar with standard practices for preventing accidents. The installer should be
familiar with network structures, terms, and concepts.
Use only the power supply and accessories approved by the manufacturer, which can be found in the
original packaging of this product.
This equipment is to be installed by trained and qualified personnel, as per these installation
instructions. The installer is responsible for making sure, that the Installation of the equipment is
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the
device.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or
hot environments.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device.
Please use this product with care and operate at your own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging
the power plug from the power outlet.
This is a Class A product. In a domestic environment, this product might cause radio interference in
which case the user might be required to take adequate measures.
To avoid contamination of the environment, separate the device from household waste and dispose of it
in a safe manner, for example, in designated areas. Become familiar with procedures for properly
transporting the equipment to designated collection points in your area.
Electric shock hazard. This equipment is to be serviced by trained personnel only
Manufacturer: Mikrotikls SIA, Unijas 2, Riga, Latvia, LV1039.
BG - Български. Бързо ръководство:
Това устройство трябва да бъде надстроено до RouterOS v7.10.1 или най-новата версия, за да
се гарантира спазването на местните регулаторни разпоредби.
Крайните потребители са отговорни за спазването на местните разпоредби. Всички
устройства MikroTik трябва да бъдат професионално инсталирани.
Това бързо ръководство обхваща модела: CCR2116-12G-4S+.
To Next Page
Loading...
Need help?
General
