LED
Hidden Green LED behind the Reset button is a USER LED
Blue LED 1 is the DC1 Power LED
Blue LED 2 is the DC2 Power LED
Green SFP LED is an SFP port link and activity LED
Ethernet RJ45 Green LEDs are Ethernet port link 1Gbps and activity LEDs
Ethernet RJ45 Port 1 Orange LED is PoE-in status LED
Ethernet RJ45 Port 2-8 Orange LEDs only - 100Mbps
Accessories
The package includes the following accessories that come with the device:
ADAPT1_EU/US Switching Power Supply 24V 1.5A 36W
SET1_ K-55 fastening set
PAD1_ 4 pcs Pad D=7; H=1.5 mm, one side adhesive 3M988T
Please visit wiki pages for the MikroTik SFP module compatibility table: https://wiki.mikrotik.com/wiki/MikroTik_wired_interface_compatibility
Operating system support
The device supports RouterOS software version 7. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as at
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.
Information contained here is subject to change. Please visit the product page on
www.mikrotik.com for the most up-to-date version of this
document.
To Previous Page
Loading...
