12-57 V (direct current).
First steps:
 Open the Ethernet port door;
 Insert the SIM card into the slot, with the chip facing UP;
 Connect the device to the included PoE injector with Ethernet cable to the data+power end;
 Connect the data end of the PoE injector to the computer;
 Connect the power adapter to the PoE injector;
 Open the https://192.168.188.1 in your web browser;
 User name: admin, and there is no password (or, for some models, check user and wireless passwords 
on the sticker);
 Use the check for update option to upgrade the device to the latest version. You must have an active 
SIM card with available data;
 The device will reboot;
 Connect again and in the QuickSet menu set your country, to apply country regulation settings;
 Secure your device and set a strong password.
Safety Information:
 Before you work on any MikroTik equipment, be aware of the hazards involved with electrical 
circuitry, and be familiar with standard practices for preventing accidents. The installer should be 
familiar with network structures, terms, and concepts.
 Use only the power supply and accessories approved by the manufacturer, which can be found in the 
original packaging of this product.
 This equipment is to be installed by trained and qualified personnel, as per these installation 
instructions. The installer is responsible for making sure, that the Installation of the equipment is 
compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify the 
device.
 This product is intended to be mounted outdoors on a pole. Please read the mounting instructions 
carefully before beginning installation. Failure to use the correct hardware and configuration or to 
follow the correct procedures could result in a hazardous situation for people and damage to the 
system.
 We cannot guarantee that no accidents or damage will occur due to the improper use of the device. 
Please use this product with care and operate at your own risk!
 This is a Class A product. In a domestic environment, this product might cause radio interference in 
which case the user might be required to take adequate measures.