MikroTik R11e Series

R11e series
R11e-LTE-US is a Cat-4 modem. It can be integrated into any MikroTikproduct that has a miniPCI-e slot.
R11e-LTE-US
R11e-LTE
R11e-4G
R11e-LTE6
Specifications
Interface – Mini-PCIe;
Temperature Operating-30°C .. +70°C
LTE Channel Bandwidth:1.4/3/5/10/15/20 MHz
LTE Category:4 (150Mbps Downlink, 50Mbps Uplink)
3G Category: R7 (Cat14 - 21.1Mbps Downlink)
LTE (FDD) bands:2/4/5/12 (1900/1700/850/700)
3G bands:2/5 (1900/850)
Installing the module in your device
R11e-TE-US for professional use. Each of the cards comes in ESD protective packaging. When handling electrical equipment please observe the following
safety precautions:
Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical discharge (ESD) damage;
After unpacking please place the card on the anti-static mat;
When installing make sure there are no objects that can damage or touch the PCB plate;
The card can be installed in your desired device using the factory provided screw holes in a PCB plate;
Locate miniPCIe slot on your device;
Unscrew two factory attached screws;
Optionally you can use the thermal pad by placing it under the card, the thermal pad is not included in the package;
Install the module to the miniPCIe slot and secure it with previously removed screws. Tightening torque 0,3 Nm;

MikroTik R11e Series Specifications

General

Category	Modem
Series	R11e
Interface	Mini PCIe
Humidity	5% to 95% non-condensing
Supported Networks	LTE
Max Download Speed	150 Mbps
Max Upload Speed	50 Mbps
Storage Temperature	-40°C to 70°C
Power Supply	3.3V
Dimensions	30 x 51 x 5 mm

Summary

Product Specifications

Interface and Operating Temperature

Specifies the interface type as Mini-PCIe and the operating temperature range from -30°C to +70°C.

LTE and 3 G Capabilities

Details LTE channel bandwidths, categories (downlink/uplink speeds), and supported 3G categories.

LTE and 3 G Bands

Lists the specific LTE (FDD) bands (2/4/5/12) and 3G bands (2/5) supported by the module.

Module Installation Guide

Safety Precautions for Handling

Outlines essential safety measures, including ESD protection, proper handling, and avoiding damage to the PCB.

Installation Steps

Provides a step-by-step guide for installing the module, including locating the slot, removing screws, and securing the module.

Configuration and OS Support

Automatic Device Recognition

Explains automatic recognition in RouterOS and where to find configuration details in the 'Wireless' menu.

Operating System Compatibility

States support for RouterOS v6 and above, noting that other OS compatibility is untested and drivers are not included.

Regulatory Compliance Statements

FCC Interference Statement

Details FCC compliance for Class B devices, limits on interference, and measures to correct reception issues.

RF Exposure and Antenna Warning

Addresses minimum safe distances for RF exposure and warns against using uncertified antennas.

Industry Canada Compliance

Covers compliance with Industry Canada's license-exempt RSS standards and conditions for operation.

OEM Integrator Notice

Provides essential information for Original Equipment Manufacturers regarding module installation limitations and approvals.

CE Declaration of Conformity

EU Directive Compliance

Declares compliance with EU Directive 2014/53/EU, stating the manufacturer and providing a link to the full declaration.

LTE Transmit Power Limits

Confirms adherence to maximum LTE transmit power limits as per ETSI regulations for various frequency bands.