MikroTik RB941-2nD-TC Quick Start Guide

EN - English -Quick Guide:
This Quick Guide covers models: RB941-2nD-TC (hAP lite TC), RB941-2nD (hAP lite),RB931-2nD (hAP mini).
This is a wireless network device. You can find the product model name on the case label (ID).
Please visit the user manual page on for the full up-to-date user manual. Or scan the QR code with your mobile phone.https://mt.lv/um
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
The most important technical specifications for this product can be found on the last page of this Quick Guide.
Configuration manual for software in your language with additional information can be found athttps://mt.lv/help
If you need help with configuration, please seek a consultanthttps://mikrotik.com/consultants
This device needs to be upgraded to RouterOS v7.10 or the latest stable version, to ensure compliance with local authority regulations!
It is the end users' responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must be installed according to instructions.

MikroTik RB941-2nD-TC Specifications

General

CPU	650 MHz
RAM	32 MB
Ethernet Ports	4
Wireless Standards	802.11b/g/n
Antenna Gain	1.5 dBi
Dimensions	113 x 89 x 28 mm
Operating System	RouterOS
Architecture	MIPSBE
CPU Model	QCA9531
Number of CPU cores	1
Storage Type	FLASH
Wireless 2.4 GHz chip model	QCA9531
Wireless 2.4 GHz generation	Wi-Fi 4
Wireless 2.4 GHz number of chains	2
Power Jack	Yes
PoE in	No
License level	4
Max Power consumption	3.5 W
Wireless Speed	300 Mbps
Antenna	Integrated
Power Consumption	3.5 W
Storage	16 MB
Wireless 2.4 GHz data rate	300 Mbps
Supported input voltage	5 - 5 V