EasyManua.ls Logo

MikroTik RBGroove52HPn

MikroTik RBGroove52HPn
61 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Quick Guide G5
Models: RBGroove52HPn (Groove 52),
RBGrooveGA-52HPacn (GrooveA 52 ac),
RBMetalG-52SHPacn (Metal 52 ac)
EN - English - Quick Guide:
This device needs to be upgraded to RouterOS v7.9.2 or the latest version to ensure compliance with
local authority regulations!
It is the end user's responsibility to follow local country regulations, including operation within legal
frequency channels, output power, cabling requirements, and Dynamic Frequency Selection (DFS)
requirements. All MikroTik radio devices must be professionally installed
This is Wireless Network Device. You can find the product model name on the case label
(ID).
Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the
QR code with your mobile phone.
The most important technical specifications for this product can be found on the last page of this Quick
Guide.
Technical specifications, brochures, and more info about products at https://mikrotik.com/products
Configuration manual for software in your language with additional information can be found
at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a
consultant https://mikrotik.com/consultants
Depending on the antenna used, you must set its gain and set the installation set to 'Outdoor'. This is to
ensure that EIRP meets the limit set by the local authorities. This is done in the WebFig Quickset menu.
First steps:
Question and Answer IconNeed help?

Do you have a question about the MikroTik RBGroove52HPn and is the answer not in the manual?

MikroTik RBGroove52HPn Specifications

General IconGeneral
BrandMikroTik
ModelRBGroove52HPn
CategoryWireless Access Point
LanguageEnglish

Summary

EN - English - Quick Guide

First Steps

Steps to configure the device and set it up for operation.

Safety Information

General Safety Guidelines and Precautions

Covers electrical hazards, proper installation, approved accessories, and disclaimer.

Antenna Installation and Approved Antennas

Antenna Installation Warning

Installer's responsibility for using certified antennas and configuring output power.

Approved 2.4 GHz Antennas

Certified antennas for 2.4 GHz band, including models and gain.

Approved 5 GHz Antennas

Certified antennas for 5 GHz band, including models and gain.

CE Declaration of Conformity

WLAN Technical Details

WLAN Frequency and Power Specifications

Details operating frequency bands and maximum output power for WLAN.

Related product manuals