Products with the letters “EG” at the end of their serial number have their wireless frequency range
limited to 5.250 – 5.350 GHz, the TX power is limited to 20dBm (EIRP).
Please make sure the device has a lock package (firmware version from the manufacturer) which is
required to be applied to the end-user equipment to prevent the end-user from reconfiguration. The
product will be marked with country code “-EG”. This device needs to be upgraded to the latest version
to ensure compliance with local authority regulations! It is the end users responsibility to follow local
country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All MikroTik radio devices must
be professionally installed.
Accessories
To avoid pollution of the environment, please separate the device from household waste and dispose of
it in a safe manner, such as in designated waste disposal sites. Familiarize yourself with the procedures
for the proper transportation of the equipment to the designated disposal sites in your area.
Federal Communication Commission
Interference Statement
Model FCC ID
RBwAPG-5HacD2HnD-US
TV7WAPGR5AC2
D
RBwAPG-5HacD2HnD-BE-
US
TV7WAPGR5AC2
D
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: