Do you have a question about the MikroTik hAP ac2 and is the answer not in the manual?
CPU | IPQ-4018 716 MHz |
---|---|
RAM | 128 MB |
Storage | 16 MB Flash |
Ethernet Ports | 5x 10/100/1000 Mbps |
Architecture | ARM 32bit |
PoE in | 802.3af/at |
Wireless Standards | 802.11a/b/g/n/ac |
Antennas | Internal |
Wireless 2.4 GHz | 802.11b/g/n |
Wireless 5 GHz | 802.11a/n/ac |
Operating System | RouterOS |
Frequency Band | 2.4 GHz / 5 GHz |
PoE out | Passive PoE |
Covers electrical hazards, standard practices, disposal, installation compliance, and environmental considerations.
Includes using approved accessories, power sources, failure handling, and customer responsibility for regulations.
Addresses RF radiation exposure limits from FCC, IC, and EU, and safe operating distances.
Step-by-step guide to connect to the internet and initial device configuration.
Recommendation to update RouterOS for performance and stability, and access to help resources.
Details on Ethernet ports, switch chip capabilities, and wireless module modes.
Explains the functions of the RouterBOOT reset button for different recovery modes.
Specifies that only RouterOS has been tested and is supported for the device.
Details FCC compliance, limits for Class B digital devices, and measures to correct interference.
Information regarding compliance with Canadian regulatory standards for radio devices.
Indicates compliance with United Kingdom conformity assessment requirements.
Details technical specifications and manufacturer information for the Eurasian market.
Specifies Mexican regulations for frequency range, power, and energy efficiency.
Details Ukrainian technical regulations for radio equipment and operational permits.
Declares compliance with EU Directive 2014/53/EU for radio equipment.
Outlines restrictions and usage conditions for specific frequency bands within the EU.