MikroTik NetMetal Series User Manual (English)

To Next Page

10.

11.

NetMetal-series

This User Manual covers NetMetal models:

NetMetal 5,

NetMetal 5SHP,

NetMetal 5 triple,

NetMetal 5SHP triple.

The NetMetal is a solid and waterproof outdoor device. It has a high power wireless interface, and one Gigabit Ethernet connector, which supports MDI-X

auto-detection. The device has two or three RP-SMA connectors for connecting external antennas (depends on model). The device is packaged with a 24

V power adapter, a PoE injector, and two mounting loops. There are four models available – two Three-chain devices (with miniPCIe slot and without), and

two Dual-chain models (with miniPCIe slot and without). Extra places for more RP-SMA connectors are available on the unit in this case.

First use

Connect the device to the included PoE injector with Ethernet cable;

Connect the PoE injector into the computer;

Connect the power adapter to the PoE injector;

Download WinBox configuration tool ;https://mt.lv/winbox

Default IP: 0.0.0.0, user name: and there is no password, use

admin

 Neighborstab and connect through MAC address;

DHCP Client enabled on the bridge;

Once connected configure the device, so it has an active Internet connection ;https://mt.lv/configuration

Upgrade the RouterOS software to the latest version ;https://mt.lv/upgrade

In the "QuickSet, CPE" menu set up the following: Choose your country, to apply country regulation settings;

Set the antenna gain, depending on the antenna used;

Set up your router password in the bottom field.

Mounting

The NetMetal is designed to be used outdoors and mounted on pole or DIN rail.

When mounting, please ensure that the cable feed is pointing downwards.

The IP rating scale of this device is IP66. We recommend using Cat6 shielded cables.

Warning! This equipment should be installed and operated with a minimum distance of 20 cm between the device and your body. Operation of this

equipment in the residential environment could cause radio interference.

Mounting and configuration of this device should be done by a qualified person.

The mounting hose clamp is provided with the package.

Other manuals for MikroTik NetMetal Series

Quick Setup Guide And Warranty Information4 pages

Need help?

Do you have a question about the MikroTik NetMetal Series and is the answer not in the manual?

MikroTik NetMetal Series Specifications

General

Category	Wireless Access Point
Model	NetMetal Series
Wireless Standards	802.11a/b/g/n/ac
Frequency Band	2.4 GHz, 5 GHz
Power Supply	PoE (Power over Ethernet)
Operating System	RouterOS
Mounting	Wall or pole mountable
Max Wireless Throughput	Varies depending on the model (e.g., 867 Mbps for NetMetal ac2)
Max Data Rate	Varies depending on the model (e.g., 867 Mbps for NetMetal ac2)
Dimensions	Varies slightly depending on the model (approximately 143 x 247 x 48 mm)
CPU	Varies depending on the model (e.g., QCA9557 for NetMetal 5, IPQ-4018 for NetMetal ac2)
RAM	Varies depending on the model (e.g., 128 MB for NetMetal 5, 128 MB for NetMetal ac2)
Operating Temperature	-40°C to +70°C
IP Rating	IP54