MiLAN MIL-SM4004TG - User Manual

i
4 10/100/1000TX plus 4 SFP Managed Switch
MIL-SM4004TG
User Manual
Rev. A2
2007-12-28

Summary

Introduction and Features

Key Features Overview

Lists core functionalities and specifications of the managed switch.

Hardware Description

Front Panel, LEDs, and Installation

Describes front panel, LEDs, installation and power-on procedures.

Network Application

Desktop and Segment Use Cases

Explains switch usage in workgroups and enterprise backbones.

Management Interfaces

Console Port Connection and Login

Details connecting to and logging into the switch console.

CLI Management and Command Levels

Outlines CLI command modes and general interface usage.

CLI Command Sets

System, Port, and Trunk Commands

Covers CLI commands for system, port, and trunk configurations.

VLAN, Spanning Tree, and QoS Commands

Lists CLI commands for VLAN, Spanning Tree, and QoS.

SNMP, 802.1 x, and MAC Commands

Details CLI commands for SNMP, 802.1x, and MAC address management.

Web-Based Management

System Event Log and SNTP Configuration

Configures logging and time synchronization settings.

IP Security and User Authentication

Manages IP access control and user login credentials.

Port Control, VLAN, and Spanning Tree Configuration

Manages port settings, VLANs, and Spanning Tree.

SNMP, QoS, and X-Ring Configuration

Configures SNMP, QoS, and X-Ring topology features.

802.1 X;Radius and MAC Address Management

Configures 802.1x authentication and MAC address tables.

System Maintenance

Factory Default, Save, and Reboot

Resets settings, saves configuration, and reboots the switch.

Troubleshooting

Connection and Topology Issues

Addresses cable issues, network topologies, and LED diagnostics.

Technical Specifications

MiLAN MIL-SM4004TG Specifications