Need help?Do you have a question about the Milesight NVR Series and is the answer not in the manual?
General| Video Output | HDMI, VGA (depends on model) |
|---|---|
| Recording Resolution | Up to 12MP |
| HDD Support | Yes (SATA) |
| Maximum HDD Capacity | Up to 10TB for each HDD |
| Video Compression | H.265, H.264 |
| Network Interface | 2 × RJ45 10/100/1000 Mbps self-adaptive Ethernet interfaces |
| Audio Input/Output | Yes (depends on model) |
| Operating Temperature | -10℃~+55℃ |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Humidity | 10%~90% |
Important safety precautions to prevent injury or death.
Measures to prevent equipment damage or potential injury.
Description of hardware interfaces and panel buttons for NVR models.
Step-by-step guide for installing hard disks into NVR.
Initial setup guide for configuring the NVR through a wizard.
Interface for real-time video monitoring and layout configuration.
Reviewing recorded video footage: General, Event, Tag, Picture Playback.
Adding and managing IP cameras via search or manual input.
Adjusting camera image display settings.
Configuring video recording schedules and settings.
Managing local and network disk storage.
Setting up motion detection zones, sensitivity, and actions.
Video Content Analysis features and their configurations.
General system parameters: Device Name, Boot Wizard, time.
Network configuration: IP, DNS, UPnP, DDNS, Email, P2P.
Managing user accounts, levels, and privileges.
System maintenance: Upgrade, Reset, Configuration backup.
Checking the status and parameters of connected cameras.
Accessing, searching, and exporting system logs.
Logging into the NVR web interface and plugin installation.
Reviewing recorded video footage and performing backups.
To Next Page
