Need help?Do you have a question about the Milesight NVR and is the answer not in the manual?
Details on NVR models covered in the manual.
Overview of Milesight NVR Series positioning and technology.
Lists key functions including basic info, monitoring, HDD management, recording, and playback.
Instructions for buttons and lights on NVR front panels.
Guide on operating the NVR using a USB mouse.
Explanation of the IR remote controller buttons and functions.
Step-by-step guide for initial NVR setup wizard.
Instructions for playing and backing up recorded files.
How to play recorded video files by time period.
Procedure for backing up video files to external devices.
Guide to searching and viewing snapshot files.
Steps to backup snapshot files to storage media.
Instructions for managing connected cameras and adding new ones.
How to search for IP cameras on the network.
Settings for Pan-Tilt-Zoom camera control and configuration.
Configuring PTZ parameters like baud rate and protocol.
Setting up camera patrol routes using key points.
Configuring camera patrol back and forth in constant speed.
How to access and use PTZ control mode.
How to mask privacy areas on video feeds.
Setting up On-Screen Display (OSD) for video titles and timestamps.
Configuring the NVR's recording modes (No Record, Always Record, Schedule).
Setting up recording schedules for different days and times.
Configuring advanced recording parameters like post-record and stream type.
Configuring actions to trigger upon video loss detection.
Setting up motion detection zones and trigger actions.
Configuring behavior for external alarm inputs.
Configuring actions for alarm output signals.
Setting up alerts for system exceptions like network or HDD errors.
Displays NVR's device ID, name, hardware and software versions.
Shows network connection details, IP address, and rates.
Displays status of connected cameras, including IP, record, and state.
Provides information on HDD status, capacity, and usage.
Shows overview of recorded events and alarms.
Lists details of triggered alarm inputs.
Displays event status for each camera channel.
Instructions on viewing live video feeds and understanding channel icons.
Customizing the screen layout for live view channels.
Advanced live view parameter adjustments like borderlines and channel names.
Configuring general NVR parameters like host name, resolution, and time.
Network configuration including IP, DHCP, DNS, and MTU.
Setting up basic network parameters.
PPPoE setup for internet connection.
Dynamic DNS setup for accessing NVR remotely.
Configuring email alerts for events.
Enabling P2P for mobile viewing without port forwarding.
Additional network settings including SSH, HTTP, RTSP, and Service ports.
Managing NVR hard disk drives.
Basic disk configuration and formatting options.
Performing S.M.A.R.T tests for HDD health.
Setting up holiday schedules for recording or image capture.
Managing user accounts, privileges, and credentials.
Instructions for upgrading NVR firmware.
Backing up and restoring NVR configuration settings.
Detailed steps for backing up and restoring configuration.
Resetting NVR parameters to factory default settings.
Configuring retention periods for logs and photos.
Exiting the current user login session.
Restarting the NVR device.
Turning off the NVR device.
Exiting the application or interface.
Contact information for technical support and services.
To Next Page
General
