Millenium HD-120 - Page 22

1.
Press to turn the metronome on.
2.
To set the desired tempo, press and hold until the display shows ‘b - (number)’ .
3.
Use or to set a value between ‘1’ and ‘5’ for the time signatures 1/4 … 5/4.
4.
Press to exit the setting mode.
5.
To turn o the metronome, press again .
1.
Press to turn the metronome on.
2.
To set the desired volume of the metronome, press and hold and simultaneously
until the display shows ‘Lu(number)’ .
3.
Use or to set a value between ‘0’ (silent) and ‘9’ (maximum).
4.
Press to exit the setting mode.
5.
To turn o the metronome, press again .
Settings
Volume
Operating
22
HD-120
E-Drum Module