6 Operating
6.1 Functions
Check all cable connections for correct t before turning on
Before switching on, turn the [VOLUME] control to minimum.
Use the [ON/OFF] switch on the rear of device to switch on the drum module.
Automatic shuto
– When the device is not used it automatically shuts o after 30 minutes. To turn it
back on set the on / o switch to ‘OFF’ and then to ‘ON’ again.
Disabling automatic shuto
– To disable the automatic shuto function, press and hold [START/STOP] while
turning the unit on.
The message ‘PoF’ appears in the display.
To set the volume, hit a pad while slowly turning the [VOLUME] control clockwise.
Switching on
Adjusting the volume
Operating
20
MPS-150
E-Drum Module