Millenium MPS-150X - Installation Guide; Pad and Pedal Setup; Power Adapter Connection; Headphone Connection

4 Installation
Setup and assembly of the pads and pedals are described in detail in the enclosed assembly
guide. Finally check that all cables between the pads and the drum module have been prop‐
erly connected.
Connect the included power adapter to the 9V connector of the unit and then plug the power
adapter into a wall outlet.
Connect your stereo headphones to the PHONES output of the drum module.
Setup, connecting pads and
pedals
Connecting the power adapter
Connecting headphones
Installation
14
MPS-150X
E-Drum Module