1. Press [MODE] and [PAGE] simultaneously.
ð
The display shows the playback speed.
2. Adjust the playback speed using [–] and [+] (setting range: 30 to 280 beats per minute).
The setting is automatically stored.
6.4 Selecting and adjusting drum kits
You can select one of the preprogrammed drum kits. The preprogrammed voices of the drum
module can be programmed to any of the connected pads.
To select a certain drum kit, proceed as follows:
1. Press [MODE] repeatedly until the [KIT] LED lights up.
ð
The display shows the kit number.
2. Use [–] and [+] to select the desired kit (see ).
The setting is automatically stored.
Adjusting playback speed
Selecting a drum kit
Operating
24
MPS-150X
E-Drum Module
To Next Page
Loading...
