1. Press [MODE] repeatedly until the [PATTERN] LED lights up.
ð
The display shows the pattern number.
2. Press [PAGE].
ð
The pattern volume appears in ‘Axx’ format on the display.
3. Use [–] and [+] to adjust the volume in a range between 00 and 32.
The setting is automatically stored.
1. Press [MODE] repeatedly until the [PATTERN] LED lights up.
ð
The display shows the pattern number.
2. Press [PAGE].
ð
The drum volume appears in ‘dxx’ format on the display.
3. Use [–] and [+] to adjust the volume in a range between 00 and 32.
The setting is automatically stored.
Adjusting pattern volume
Adjusting drum volume
Operating
MPS-150X
23
E-Drum Module