1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE].
ð
The set sound, the so-called ‘click instrument’ is displayed in ‘CLx’ format.
3. Use [–] and [+] to select the sound. Possible values are: CL1 – CL5, default value: CL1.
The setting is automatically stored.
1. Press [MODE] repeatedly until the [CLICK] LED lights up.
2. Press [PAGE].
ð
The set volume appears on the display, for example ‘L24’ .
3. Use [–] and [+] to adjust the volume in a range between 0 and 32.
The setting is automatically stored.
Setting the Click sound
Setting the Click volume
Operating
30
MPS-150X
E-Drum Module
To Next Page
Loading...
