Millenium MPS-750X PRO User Manual

Assembling the snare
,
-
.
+
1. Open the legs (10) of the snare pad stand so it is stable.
2. Open the arms (11) of the snare stand. Pull the arms of the snare pad stand as far apart as possible.
3. Place the snare pad (12) onto the stand so it is facing upwards.
4. Tighten the arms (13) of the snare stand with the stabiliser (13).
Assembling the drum module
1
/
0
2
1. Place the base of the drum module (14) on the holder (15) so that the holes are above each other.
2. Screw the drum module to the holder.
3. Unfold the support tube (16).
4. Place the drum module in the fastening clamp by its holder (17)
5. Tighten the wing nuts of the fastening clamps.
Assembly
12
MPS-750X PRO
E-Drum Set

Millenium MPS-750X PRO Specifications

General

Sequencer	Yes
Type	E-Drum Set
Crash Cymbal	12" Dual-Trigger Pad
Drum Module	MPS-750
Connectivity	USB, MIDI, Aux In, Headphone Out
Additional Features	Metronome
Power Supply	AC Adapter (Included)
Tom 1	8" Single-Trigger Pad
Tom 2	8" Single-Trigger Pad
Tom 3	10" Single-Trigger Pad