Millenium MPS-750X PRO - Ground Tom Setup

%
&
'
(
1. Insert the connecting part (5) for the support tubes (6).
2. Place the two support tubes (6) of the tom pads in the holes of the connecting part (5).
3. Adjust the orientation of the lower memory locks (7) so the tap is pointing down.
4. Place the two tom pads in the support tubes (6) and adjust the upper memory locks (7).
Setting up the ground tom
*
)
1. Push the legs (8) of the ground tom into the connecting parts (9) on the sides.
2. Tighten the wing nuts of the fastening clamps.
Assembly
MPS-750X PRO
11
E-Drum Set