Parameter Function
Calib. This parameter denes the playing range of the hi-hat pedal. The set range is shown in the
display in the lower right corner.
Press [ENTER] to select the option. Press the pedal down to the oor and press [ENTER] to set
the minimum. Release the pedal slowly and press [ENTER] to set the maximum. The value
range is stored in the module and allows a more precise strike. It is recommended not to set
extreme values to allow easy playing.
The range between ‘Hi-Hat open’ and ‘Hi-Hat closed’ is called ‘HalfOpen’ . For increasing the range ‘HalfOpen’ ,
increase the ‘Open Point’ and decrease the ‘Close Point’ .
Open Point Setting the position where the Hi-Hat is open. The value is displayed in the entire Hi-Hat pedal
range. The higher the value is, the closer it is to the position where the pedal is released. This
means that the range for open Hi-Hat is very small.
Close Point Setting the position where the Hi-Hat is closed. The value is displayed in the entire Hi-Hat
pedal range. The lower the value is, the closer it is to the position where the pedal is pressed
down to the oor. This means that the range for closed Hi-Hat is very small.
Type Selection of the trigger type for input [EXT2].
‘Mesh’ for mesh head pad.
‘Bar’ for bar trigger pad.
Operating
MPS-750X, MPS-750X PRO
29
E-Drum Module