Millenium MPS-750X - Page 28

Parameter Function
Xtalk If several pads are mounted on a rack, vibrations can be transmitted to other pads when you
hit a pad and unintentionally trigger sounds. This crosstalk can be avoided by the appropriate
setting. The value should be set as low as possible.
Press [ENTER] to store the setting. Trigger the selected pad with maximum power until ‘OK’ is
shown. Choose another pad if necessary and repeat the process. Conrm the value with
[ENTER].
Note Send Setting the MIDI note value which is sent in MIDI operation
Rim Velocity Setting the volume of the rim trigger regardless of the actual strike intensity. The higher the
value, the higher the volume when playing the rim trigger, and vice versa.
Pedal Vel. Setting the Hi-Hat volume. Select this option and press down the Hi-Hat pedal with maximum
power. The harder you press down the pedal, the louder is the Hi-Hat. Conrm the value with
[ENTER].
Split Point Setting the rim trigger response value of the snare. If you play the Rim trigger of the snare
softly you hear the Cross Stick sound. Above the response value you hear the Rim Shot sound.
Chick Time Setting the time period how long after triggering the pedal no other signal is accepted. This
setting avoids unintentionally triggering caused by physical contact.
Splash Time Setting the level of diculty for triggering the pedal splash.
Operating
28
MPS-750X, MPS-750X PRO
E-Drum Module