PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT!
PLEASE READ THIS MA N UA L I N I TS ENTIRE T Y P R I O R TO USING THIS PRO D U C T!
PLEASE READ THIS MA N UA L I N I TS ENTIRE T Y P R I O R TO USING THIS PRO D U C T!
022016
15
MILLENNIUM L220 18’ DOUBLE LADDERSTAND ASSEMBLY
Some assembly is required prior to your use of your Millennium treestand. NOTE: ALL assembly shall be performed with the ladderstand
components laying at on the ground.
Tree Blade
(2) Shooting Rail Adjusters
Seat Assembly
(2) Uprights
Shooting Rail (3 pieces)
Footrest
Platform
Platform Reinforcement
(2) Vertical Supports
Ladder Adapter
Spring Pin
Spring Pin
WARNING! DO NOT place more than fteen (15) pounds (7 kg) of weight on
the footrest or the shooting rail. Doing so will result in an unsafe condition.
Failure to follow these instructions may result in serious injury or death!
Ratchet Straps
(one shown/not to scale)
Stabilizing Straps
(one shown/not to scale)
Figure 15
Components of the L220 18’ Double Ladderstand