Processes
MIG (GMAW)
Flux Cored (FCAW)
Input Power
208/230 V, 1-Phase, 60 Hz
Industrial Applications
Metal Fabrication
Maintenance and Repair
Farm/Home
Light Industrial
Quick
Specs
Millermatic
®
212
MIG Arc Welding Power Source,
Wire Feeder and Gun Package
Issued September 2010 • Index No. DC/12.46
The Power of Blue
®
.
Rated Output 160 A at 24.5 VDC, 60% Duty Cycle
Max. Open-Circuit Voltage 34.5 VDC
Amperage Range 30 – 210 A
Wire Feed Speed 50–700 IPM (1.3–17.8 m/min)
Weight 178 lb (81 kg)
Welder is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Gun warranted for 90 days, parts and labor.
EZ-Access
™
Consumable Compartment
and Parameter Chart — with convenient
new flip-down compartment that provides
fast access to parameter chart and
consumables.
See page 3 for more
information.
Compatible with
the Millermatic
®
Reach Wire
Feeder. MIG Gun
sold separately.
(See page 5
for more
information.)
Reduce maintenance and operating
costs with our Fan-On-Demand
™
cooling
system only operates when needed,
reducing power consumption and
contaminants drawn into the machine.
Line Voltage Compensation keeps
welding output constant even if
power input varies by +/- 10%.
Compatible with Spoolmate
™
200
spool gun! The
Spoolmate 200
with wirefeed speed
control on the gun saves
time for the operator by
eliminating the need to go
back to the machine to change the
spool gun wirefeed speed.
Infinite voltage control replaces “tap”
settings which means that you now can
“dial in” precise weld voltage and wirefeed
speed when using the Manual Mode.
Auto-Set
™
is a breakthrough control that
automatically sets your welder to the
proper parameters. Auto-Set makes set
up very simple and gives you precise
settings instantly. See page 2 for details.
Comes Complete With:
7 ft (2.1 m) power cord and plug
(208/230 V model only)
15 ft (4.6 m), 250 amp M-25 MIG gun
for .030/.035 in wire
10 ft (3 m) work cable and clamp
Argon mix regulator/flow gauge and hose
Extra contact tips
Factory-installed running gear with
EZ-Change
™
Low Cylinder Rack
.030/.035 in reversible
drive rolls
Set-up and operation
interactive CD
Material thickness
gauge(#229 895) ➤
Manual mode allows you to manually
set weld parameters for broader
applications.
Compatible with Bobcat
™
welder/generators.
No more replacing mechanical
output contactors. Our built-in
solid-state contactor circuit makes
wire electrically “cold” until trigger is
pulled, and gives you life-long welding
output and performance.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
Equipment Sales US and Canada
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
Auto-Set
™
To Next Page
General
