Millipore WP61 115 60 - Usage Guidelines

ChemicalDutyVacuum/ressureump 3
UsageGuidelines
 AlwaysusetheMillex-FA
50
ventlterand1/4inchsiliconetubing
includedwiththepumpwhenapplyingvacuum.Thiswillprevent
liquidsorvaporsfromenteringthepump.Aproperlyattached
Millex-FA
50
ventlterisillustratedinFigure1.
 Formaximumprotectionofthepump,usetheMillex-FA
50
ventlter
ANDavacuumtraptoprotectthepumpfromvaporsandgases.The
vacuumtrapconsistsofa1literlteringask(Milliporecat.no.
XX1004705,No.8stopper(XX1004708andsiliconetubing.
AdditionaltubingisavailableasMilliporecat.no.XX7100004.This
assemblyisillustratedinFigure2.
 Neverpumpordrawliquidsthroughthepump.Thiswilldamagethe
pump.Thelteraskandvacuumtrapshouldbeemptiedaftereach
use.
Figure1.roeruseofMillex-F
50
lter
Filter
holder
Millex-FA
50
lterunit
Filter
ask
Vacuum
pump
Figure2.roeruseofvacuumtraandMillex-F
50
lter
Filter
holder
Millex-FA
50
lterunit
Filter
ask
Vacuum
trap
Vacuum
pump
DOMINIQUE DUTSCHER SAS