*
this option is divided into two levels of subparameters:
» S-71: time in seconds
» D-71: distance in linear units as set in P-1
Access is made by scrolling through the levels.
press display will show
Setting the subparameters is done the same
way as with the ‘ P ’ parameters.
P-72 fuzz filter
the fuzz filter is designed to keep the display constant when minor
changes on the surface of the liquid ( ripples ), electrical noise or air
movements in the vessel occur.
enter: 0 = off
1 = on ( F )
P-73 agitator discrimination
enter: 0 = off
1 = on ( F )
9
ENTER
ALT
DISP
9
PL-513 96
To Next Page
Loading...
