Need help?Do you have a question about the Milnor 36021V5J and is the answer not in the manual?
Vital safety information for management regarding machine operation and safety.
Alerts regarding hazards within electrical and mechanical components of the machine.
Highlights dangers related to the cylinder and the laundering process, including entanglement.
Addresses hazards arising from inoperative safety devices and damaged mechanical components.
Details hazards caused by damaged or malfunctioning safety devices and mechanical parts.
Covers hazards resulting from careless operation and servicing practices.
Discusses floor and foundation requirements for rigid washer-extractor installations.
Covers floor and foundation considerations for flexibly-mounted washer-extractors.
Details building code requirements and user responsibility for floor strength and rigidity.
Explains how improper chemical application can damage stainless steel and machine components.
Outlines equipment and procedures to prevent damage from chemical supply systems.
Provides standard torque requirements for frequently used fasteners on Milnor equipment.
Torque values for carbon steel fasteners without threadlocker, by size and grade.
Torque values for fasteners when using specific Loctite threadlocking products.
Instructions for applying threadlocker to fasteners in blind holes.
Instructions for applying threadlocker to fasteners in through holes.
Methods for disassembling fasteners, including heat application for high-strength threadlocker.
Details the components and assembly of the motor mount for various models.
Provides a parts list and illustration for drive charts of specific models.
Illustrates and lists parts for the installation of main bearings, shells, and cylinders.
Detailed illustration and parts list for the main bearing assembly.
Lists components for a specific bearing assembly with a starplate.
Step-by-step guide and illustrations for installing an 18-inch door.
Provides an exploded view and parts list for the 18-inch door assembly.
Illustrates and lists the components of a 20-inch door assembly.
Focuses on the 20-inch flat front door, including its components and installation.
Details the installation of locks, hinges, and door glass for the 20-inch door.
Illustrates and lists parts for the soap chute assembly.
Details the peristaltic supply assembly with illustrations and parts list.
Provides illustrations and parts list for the 5-compartment supply system.
Defines standard and isometric symbols used in schematic diagrams.
Illustrates the water flow and components of the machine's water system.
Shows illustrations and parts for the water inlet assemblies.
Instructions on how to adjust the vibration safety switch for proper operation.
Explains the purpose and effect of the vibration safety switch in machine operation.
Details the process of adjusting the vibration safety switch sensitivity.
Illustrates and lists parts for the vibration safety switch assembly.
Shows the location and part number for the temperature probe.
Details the level sensing system, including components and installation.
To Next Page
General
